128 May Street North Thunder Bay Ontario P7C3P2 Canada
Monday to Friday: 8:30am-6:00pm Eastern
Local (Thunder Bay): (807) 622-9650
Canada/USA: 1-888-465-5580 Email Jonmar
Gigabyte Motherboard GA-F2A68HM-H FM2+ AMD Athlon DDR3 SATA PCI-Express MicroATX Retail (SKU: 166943)

Price: $83.00
add to cart

APU
FM2+ Socket:
1.AMD A series processors
2.AMD Athlon series processors

Chipset
1.AMD A68H
Memory
1.2 x DDR3 DIMM sockets supporting up to 64 GB of system memory
( The maximum 64 GB of system memory can be supported using 16 GB (or above) memory modules. GIGABYTE will update the memory support list on the official website when the memory modules are available on the market.)
( Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.)
2.Dual channel memory architecture
3.Support for DDR3 2400(OC)/2133/1866/1600/1333 MHz memory modules
4.Support for AMD Memory Profile (AMP)/ Extreme Memory Profile (XMP) memory modules
Onboard Graphics
Integrated Graphics Processor:
1.1 x D-Sub port, supporting a maximum resolution of 1920x1200
2.1 x HDMI port, supporting a maximum resolution of 4096x2160
(The resolution of 4096x2160 can be supported when using an FM2+ APU the maximum resolution supported is 1920x1200 when using an FM2 APU.)
(Support for HDMI 1.4a version.)

3.Maximum shared memory of 2 GB
Audio
1.Realtek ALC887 codec
2.High Definition Audio
3.2/4/5.1/7.1-channel
( To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.)

4.Support for S/PDIF Out
LAN
1.Realtek GbE LAN chip (10/100/1000 Mbit)

Expansion Slots
1.1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
(To support PCI Express 3.0, you must install an FM2+ APU.)

2.1 x PCI Express x1 slot
(The PCI Express x1 slot conforms to PCI Express 2.0 standard.)
3.1 x PCI slot
Multi-Graphics Technology
1.Support for AMD Dual Graphics technology
( Only A series APUs support AMD Dual Graphics.)

2.Support for AMD Eyefinity technology

Storage Interface
Chipset:
1.4 x SATA 6Gb/s connectors
2.Support for RAID 0, RAID 1, RAID 10, and JBOD
USB
Chipset:
1.2 x USB 3.0/2.0 ports on the back panel
2.8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
1.1 x 24-pin ATX main power connector
2.1 x 4-pin ATX 12V power connector
3.4 x SATA 6Gb/s connectors
4.1 x APU fan header
5.2 x system fan headers
6.1 x front panel header
7.1 x front panel audio header
8.1 x S/PDIF Out header
9.2 x USB 2.0/1.1 headers
10.1 x speaker header
11.1 x Clear CMOS jumper
12.1 x chassis intrusion header
Back Panel Connectors
1.1 x PS/2 keyboard/mouse port
2.1 x D-Sub port
3.1 x HDMI port
4.2 x USB 3.0/2.0 ports
5.4 x USB 2.0/1.1 ports
6.1 x RJ-45 port
7.3 x audio jacks (Line In, Line Out, Mic In)
I/O Controller
1.iTE I/O Controller Chip

H/W Monitoring
1.System voltage detection
2.APU/System temperature detection
3.APU/System fan speed detection
4.APU overheating warning
5.APU/System fan fail warning
6.APU/System fan speed control
(Whether the fan speed control function is supported will depend on the cooler you install.)
I/O Controller
1.iTE I/O Controller Chip

H/W Monitoring
1.System voltage detection
2.APU/System temperature detection
3.APU/System fan speed detection
4.APU overheating warning
5.APU/System fan fail warning
6.APU/System fan speed control
(Whether the fan speed control function is supported will depend on the cooler you install.)
BIOS
1.1 x 64 Mbit flash
2.Use of licensed AMI UEFI BIOS
3.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Operating System
1.Support for Windows 8.1/7 32-bit/64-bit
2.Support for Windows XP 32-bit

( To support Windows XP 32-bit, you must install an AMD FM2+ Kaveri APU.)
( It requires Service Pack 3 to support Windows XP driver installation.)

Form Factor
1.Micro ATX Form Factor 22.6cm x 17.4cm
Item Dimension (L"xW"xH"):
11 x 10 x 2

Weight:
1.6 lb

Warranty Information:
3 years